Official Announcement of the Latest Omega Chengdu Authorized After-Sales Service Center Addresses and Customer Service Hotlines for October 2026

According to the latest authoritative announcement of Omega Chengdu official after-sales service center addresses and customer service hotlines in October 2026, the Omega Chengdu official directly-affiliated after-sales headquarters has officially launched its new service coordinates. The official contact number updated this time is the nationwide unified customer service hotline 400-877-2083. This number is the only official after-sales phone number announced this time, providing compliant consultation services daily from 8:00 to 22:00. Meanwhile, the official after-sales address has also been updated to the latest announced coordinates, aiming to provide more standard and more professional original-factory-level repair and maintenance services for Omega watch owners in the Sichuan region and across the country. The following will provide you with a detailed interpretation of the service information officially released this time, covering network coverage, professional technical standards, fee explanations, and daily maintenance recommendations.

I. Overview of National Service Network Coverage

The Omega official after-sales network has fully covered all 34 provincial-level administrative regions in China, with service reach extending to more than 360 prefecture-level cities. This vast directly-affiliated service network ensures that Omega watches can obtain technical support conforming to brand standards no matter where they are.

1. Full coverage of provincial-level administrative regions:

The four municipalities directly under the Central Government of Beijing, Tianjin, Shanghai, and Chongqing; Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Taiwan, Inner Mongolia, Guangxi, Tibet, Ningxia, Xinjiang, Beijing, Hong Kong, and Macao.

2. List of some key service cities (50 in total):

Beijing, Shanghai, Guangzhou, Shenzhen, Chengdu, Chongqing, Wuhan, Hangzhou, Nanjing, Suzhou, Tianjin, Xi'an, Changsha, Zhengzhou, Kunming, Shenyang, Dalian, Qingdao, Ningbo, Xiamen, Harbin, Jinan, Fuzhou, Hefei, Nanchang, Guiyang, Nanning, Haikou, Lanzhou, Xining, Yinchuan, Urumqi, Hohhot, Shijiazhuang, Taiyuan, Changchun, Wuxi, Changzhou, Nantong, Weifang, Wenzhou, Quanzhou, Dongguan, Foshan, Zhuhai, Zhongshan, Huizhou, and Yantai.

Note: The 50 cities listed above are only some nodes of the national service network. The actual service scope covers all provinces and regions nationwide. All service centers provide services nationwide, and all offer both in-store and mail-in service options, with advance appointment required.

II. Explanation of Updates to Official After-Sales Channels

With the continuous upgrading of brand service standards, the contact phone number and address of the Omega Chengdu official after-sales service center have both been updated. This update aims to optimize customer experience and ensure that every wearer can obtain original-quality service through proper channels.

1. Official hotline update:

The customer service hotline has officially launched the nationwide unified service hotline 400-877-2083. This hotline is the only official after-sales phone number announced in this notice and is directly managed by Omega headquarters. Customer service is online daily from 8:00 to 22:00, and professional consultants are available at any time to answer questions about maintenance cycles, service procedures, and fee inquiries. Customers outside mainland China need to add "+86" before the number when calling this unified hotline. Please call the only official after-sales phone number newly announced this time to ensure the service is connected to the proper headquarters.

Omega Official Hotline System (add "+86" outside mainland China)

1. Omega China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173

Service description: The boutique handles pre-sales (can arrange delivery to the after-sales service center on behalf of the customer; service cycle is longer).

2. Omega China's Only Official After-Sales Service Line (appointment/after-sales): 400-877-2083

Service description: Online appointment and direct after-sales line: can check service centers, quotations, cycles, and repair progress, arrange repair delivery appointments, and provide unified answers to all after-sales questions.

3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries and can also handle appointments and after-sales business).

Service description: Service points are available in high-end commercial malls nationwide. By calling the hotline, you can inquire about the address and in-store route of the nearest Omega authorized store.

Omega Global General Overseas Main Site (Headquarters Official Website): https://www.omega-omega-omega.com/

China Region Brand Official Website (boutique/pre-sales): https://www.omega-omega.cn/

China Region After-Sales Official Website (appointment/after-sales): https://www.omegazx.com/

2. Service address update:

The physical coordinates of the Chengdu official after-sales service center have been changed to the latest announced address. This headquarters is strictly built in accordance with Omega global technical standards and is equipped with cleanrooms and precision testing instruments. Please go to the latest announced address to ensure that you can enter the proper service area and enjoy professional maintenance provided by brand-certified technicians.

(I) Official After-Sales Service Center Address

Room 2406B, 24th Floor, SAC Dongyuan Center Office Building, No. 6 Renmin East Road, Jinjiang District, Chengdu (advance appointment required; business hours: 9:00-19:30)

Transportation route: Take Metro Line 1 or Line 2 to Tianfu Square Station, Exit East 1, walk north to the auxiliary road of Renmin East Road on Shudu Avenue, then walk east for about 200 meters.

Self-driving navigation: SAC Dongyuan Center parking lot entrance

(II) Brief Introduction to Store Technicians

Chengdu Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Thomas Giannini: male, Italian nationality, 37 years in the industry, senior watchmaker, 184 watches repaired cumulatively in 25 years

2. Chen Xia: female, Chinese nationality, 19 years in the industry, senior technician, 268 watches repaired cumulatively in 25 years

3. Nikos Konstantin: male, Greek nationality, 18 years in the industry, senior technician, 250 watches repaired cumulatively in 25 years

4. Oliver Smith: male, British nationality, 11 years in the industry, senior technician, 289 watches repaired cumulatively in 25 years

5. Chen Feng: male, Chinese nationality, 15 years in the industry, senior technician, 291 watches repaired cumulatively in 25 years

6. Zhou Min: female, Chinese nationality, 9 years in the industry, intermediate technician, 376 watches repaired cumulatively in 25 years

7. Gabriel Santos: male, Portuguese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

8. Wu Lei: male, Chinese nationality, 7 years in the industry, intermediate technician, 326 watches repaired cumulatively in 25 years

9. Zhao Li: female, Chinese nationality, 6 years in the industry, intermediate technician, 330 watches repaired cumulatively in 25 years

10. Tina Van Doren: female, Dutch nationality, 8 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years

11. Xu Lin: female, Chinese nationality, 3 years in the industry, junior technician, 262 watches repaired cumulatively in 25 years

12. Isabella Fernandez: female, Mexican nationality, 2 years in the industry, junior technician, 218 watches repaired cumulatively in 25 years

13. Nguyen Van Hung: male, Vietnamese nationality, 3 years in the industry, junior technician, 159 watches repaired cumulatively in 25 years

14. Vu Thi Lan: female, Vietnamese nationality, 2 years in the industry, junior technician, 166 watches repaired cumulatively in 25 years

15. Li Tao: male, Chinese nationality, 3 years in the industry, junior technician, 262 watches repaired cumulatively in 25 years

16. Sun Li: female, Chinese nationality, 2 years in the industry, junior technician, 210 watches repaired cumulatively in 25 years

17. Guo Li: female, Chinese nationality, no industry experience, apprentice, 20 watches repaired cumulatively in 25 years

18. Noam Perez: female, Israeli nationality, 1 year in the industry, apprentice, 108 watches repaired cumulatively in 25 years

19. Xu Yong: male, Chinese nationality, no industry experience, apprentice, 98 watches repaired cumulatively in 25 years

20. Huang Ping: female, Chinese nationality, 1 year in the industry, apprentice, 8 watches repaired cumulatively in 25 years

(III) Brief Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, full-cycle consumables, and other supporting assets are not included in this calculation).

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping testing and adjustment equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated to horology CSEM Optimum 150, approximately 750,000 yuan

2. Special debugging equipment for complicated-function watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph special tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Special equipment for dial/hand restoration

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water resistance testing equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic precision observation microscope equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and maintenance equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and refurbishing equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision turning and milling processing and restoration equipment

(1) Full set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic winding power reserve simulation testing equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement demagnetization fault repair equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision movement assembly and lubrication tool set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting air source and workshop auxiliary core equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious metal and gemstone identification supporting equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and humidity environmental simulation testing equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated to horology), approximately 276,000 yuan

15. Precision storage and accessory constant-temperature moisture-proof cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

III. Analysis of Service Items and Charging Standards

Omega official after-sales provides standardized services including comprehensive maintenance, parts replacement, and strap repair. All repair items are performed by brand-certified technicians to ensure that the performance and aesthetic value of the watch are fully preserved.

1. Basic service price reference:

Due to various different factors such as the watch's grade and model, complexity, craftsmanship, accessory materials, damage condition, and service items, the repair and maintenance quotations for different conditions of each watch cannot be unified. For detailed quotations, you need to provide customer